The RAILBLAZA StarPort is the unique and versatile multifunctional mount, which allows users to fit and re-task the full range of RAILBLAZA accessories. The StarPort can be used as either a deck mount or flush mount base. This base not only comes with a gasket and cap, but also features a slide locking mechanism to confidently lock the RAILBLAZA accessory in place. Made from high grade engineering plastics, the StarPort is easily installed on kayaks, canoes, power boats, sail boats, and ATVs. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from Yak Gear. Water proof silicone recommended, but not included.
The RAILBLAZA SidePort is a unique variation of the StarPort base for use on vertical surfaces. Like all RAILBLAZA bases, it allows users to fit and re-task the full range of RAILBLAZA accessories. Made from high grade engineering plastics, the SidePort is easily installed on kayaks, canoes, power boats, sail boats, and ATVs. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from Yak Gear. Water proof silicone recommended, but not included.
With the invention of the Railblaza StarPort HD – a rectangular, four-point installation base similar in size to that of Scotty, RAM, Cannon, Fish-On, and many others – you can easily remove and replace your old bases with a Railblaza StarPort HD! Not only does this transition to Railblaza base give you the comfort of the Railblaza ‘slide locking mechanism’ fit to all of the bases and the versatility to effortlessly retask accessories from one base to another, but the transition also opens up your accessibility to Railblaza’s large selection of accessories and limitless rigging possibilities! On top of the Railblaza StarPort HD fitting straight into this space that is usually occupied by a Scotty, RAM, Cannon, or Fish-On base, the new StarPort HD also is compatible with the same hardware that is currently used to keep your base mounted to your kayak! Other options for installation hardware include rivets, screws/locknuts, and the StarPort HD Track Mounting Kit. For more information on track mounting, see the below ‘Track Mounting Notes.’ Even with the new improvements to the StarPort HD, the base stays true to the Railblaza core features: stylish, low profile, based on StarPort design featuring ‘slide locking mechanism’ and compatible with ALL Railblaza accessories.
RAILBLAZA Rail Mounts are simple to use mounts, allowing the easy attachment of RAILBLAZA accessories to kayak, marine, and recreational sport rails. The Rail Mount 19-25 can be mounted onto any 19-25mm (.75-1'') round or square rail. Hobie Adventure Island owners and Pro Angler owners will want the Rail Mount 32-41 for the Amas and rails. All Rail Mounts come complete with adaptors, rubber grips and self-adhesive grip tape. As always, this complete kit comes with all stainless steel installation hardware and installation instructions.
RAILBLAZA Rail Mounts are simple to use mounts, allowing the easy attachment of RAILBLAZA accessories to kayak, marine, and recreational sport rails. The Rail Mount 32-41 can be mounted onto any 32-41mm (1.25-1.7'') round or square rail. The 32-41 is the preferred mounting base for the rail system on the Hobie Adventure Island and Hobie Pro Angler. All Rail Mounts come complete with adaptors, rubber grips and self-adhesive grip tape. As always, this complete kit comes with all stainless steel installation hardware and installation instructions.
Now your anchor cleat can hold your favorite RAILBLAZA accessory and conserve space in a sport where space is very limited! The RAILBLAZA CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. Our new CleatPort not only gives you the option to position a cleat on the boat where you want it but also offers the ability to use that area with any of our accessories. The CleatPort is compatible with all RAILBLAZA accessories. Many people use this point for mounting their lights, rod holders, or camera mounts. Included is a unique backing plate keeping stainless fastenings isolated from aluminium decks avoiding corrosion. The CleatPort can be used on your kayak when used as a tender giving a solid tie point, whether it’s tied off the back of the boat while at anchor or to secure it to a mooring or land.
The Railblaza SwivelPort is designed to allow accessories to be easily rotated 360 degrees. The swiveling factory set friction joint can be attached to any Railblaza base and is compatible with any Railblaza accessory. Essentially, the Railblaza SwivelPort is an adaptor that allows 360 degrees of swivel for all Railblaza bases and accessories.
As an alternative to using a socket wrench to slide your accessory into the desired track mount position, the new MiniPort TracMount requires absolutely no tools for repositioning. The MiniPort TracMount by Railblaza is designed to fit most existing tracks from both kayak manufacturers and external mounting accessory companies. These compatible tracks include Wilderness Systems, Native Watercraft, Jackson Kayak, YakAttack, Scotty, and Yak Gear tracks. The completely “tool-free” operation of the MiniPort TracMount is simple! To easily fit and adjust the MiniPort TracMount, you simply turn the MiniPort. Turning the MiniPort counterclockwise will loosen the attached track nut and give you adequate slack to slide the MiniPort into your track and into position. To tighten the MiniPort into place, you simply turn it clockwise! The clockwise turn tightens directly in the track using the track nut included – thus securing your accessory into place.The MiniPort is compatible with all Railblaza accessories.Want to reposition your accessory while you are on the water? Want to reposition your rod holder quickly while you are landing a fish? Want to reposition your camera mount while you are preparing to surf a big wave in to shore? Repositioning within the MiniPort TracMount is now simple. Simply twist to loosen, slide, and twist back to tighten.Note - The MiniPort TracMount is designed for use in light duty applications.
The TracPort Dash 350 turns one StarPort into three. Supplied with our new StarPort Bridge Support, it will lock into place on your StarPort firmly, and increase your work space.
Keep the mess caused by baiting and filleting off of your boat with the Railblaza Bait Board. The Railblaza Bait Board is a great addition to any fishing kayak. With a solid combination of a sturdy construction and leight weight efficiency, the bait board is designed for even the most vigorous fishing expedition on the water providing a stable and hard wearing cutting surface. High sides prevent any spillage on to your deck or down the side of the boat.
The kit includes dual mounts for extra stability. No front lip ensures easy baiting or fileting of the catch. The molded drain spigot fits a 3/4" (19mm) hose.
The Railblaza Bait Board can be easily removed for cleaning and storage. As with the rest of the Railblaza accessories, the fillet table slots into the StarPort deck fittings (not included) which provides a secure hold but also allows quick and simple change from one Railblaza item to the next.
Railblaza bases NOT INCLUDED. The Railblaza Bait Board can be mounted on any deck, gunwale, inflatable tube, or rail using Railblaza StarPorts, SidePorts, RibMounts, or RailMounts.
The RAILBLAZA Three Axis Platform is the flexibility standard for marine mounts. With two swivel points and a tilt adjustment the platform can easily rotate and tilt. Designed with depth finders, GPS devices, and cameras in mind, flexibility and versatility is valued at a premium for a more complete experience. The Three Axis Platform can be mounted on flat vertical or horizontal surfaces using any of the Railblaza bases, but really comes in to save the day if on sloping surfaces. Supplied with a 102mm x 102mm (4x4 inch) platform made from high density polyethylene, installing accessories to it can be as simple as screwing a self-tapping screw directly into it. The Three Axis Platform fits all Railblaza bases. No hardware is needed for accessory installation because the RAILBLAZA port based system is not included. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems. Base not included
The RAILBLAZA Fixed Extender gives paddlers another 5 inches of height on any Star Port compatible RAILBLAZA accessory. The top of the fixed extender has a snap lock to secure your accessory in place. This extender is meant for horizontal surfaces and cannot be used vertically. Use the Fixed Extender to raise your RodHolder II, when the butt of your fishing pole is over 6 inches long. Base is recommended, but not included.
The Railblaza TelePole adds another dimension of versatility to the Railblaza system, it compresses to 25 inches and expands to 41 inches with a male StarPort adaptor at one end and a female StarPort at the top end. Fly a flag, attach a Railblaza Navisafe 360 LED navigation light, attach a 3 axis camera mount, or you can even add an adjustable extender with Railblaza G-Hold. Fits into any Railblaza base.
The RAILBLAZA Adjustable Extender is the ultimate accessory manipulator. The extender has one pivot that allows full-circle free rotation (under resistance) along the central axis. The extender also has a central knob to adjust for up to 180° tilt in 15° increments. The Adjustable Extender will raise your RAILBLAZA accessory about 3 inches as well. Perfect for moving any RAILBLAZA accessory into a difficult position, the top of the Adjustable Extender features snap lock to secure your accessory in place. The Adjustable Extender is meant to be mounted on a Horizontal surface, but can be used vertically for light items. Base is recommended, but not included.
The Spike Adapter threads directly into the top of the Micro Anchor Spike allowing you to mount a light, camera mount, or any other RAILBLAZA accessory.