Home » Cup Holders and Other Mounts

Cup Holders and Other Mounts

Rod Holder II & StarPort (Black)

Stop compromising rod holder standards by forcing a decision between holding a bait caster, spinning reel, offshore reel, or fly reel. The Rod Holder II will hold any type of rod and reel, with quick adjustments. The rotating collar helps reduce 'strike-theft' and the rear gimble lock reduces rod rotation for compatible rods. This rod holder is fully adjustable 360 degrees around and over 90 degrees vertically. Like all RAILBLAZA accessories, this the Rod Holder II fits all RAILBLAZA bases. The StarPort base is inclued in this complete kit, as well as all stainless steel hardware and installation instructions. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems.

Quantity

Price: $34.99

Shipping: $0.00

Loading Updating cart...

Rod Holder II (Black)

Stop compromising rod holder standards by forcing a decision between holding a bait caster, spinning reel, offshore reel, or fly reel. The Rod Holder II will hold any type of rod and reel, with quick adjustments. The rotating collar helps reduce 'strike-theft' and the rear gimble lock reduces rod rotation for compatible rods. This rod holder is fully adjustable 360 degrees around and over 90 degrees vertically. Like all RAILBLAZA accessories, this the Rod Holder II fits all RAILBLAZA bases. No hardware is needed for accessory installation because the RAILBLAZA port based system is not included. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems. Base not included.

Quantity

Price: $25.99

Shipping: $0.00

Loading Updating cart...

Rod Holder II & StarPort (White)

Stop compromising rod holder standards by forcing a decision between holding a bait caster, spinning reel, offshore reel, or fly reel. The Rod Holder II will hold any type of rod and reel, with quick adjustments. The rotating collar helps reduce 'strike-theft' and the rear gimble lock reduces rod rotation for compatible rods. This rod holder is fully adjustable 360 degrees around and over 90 degrees vertically. Like all RAILBLAZA accessories, this the Rod Holder II fits all RAILBLAZA bases. The StarPort base is inclued in this complete kit, as well as all stainless steel hardware and installation instructions. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems.

Quantity

Price: $34.99

Shipping: $0.00

Loading Updating cart...

Rod Holder II (White)

Stop compromising rod holder standards by forcing a decision between holding a bait caster, spinning reel, offshore reel, or fly reel. The Rod Holder II will hold any type of rod and reel, with quick adjustments. The rotating collar helps reduce 'strike-theft' and the rear gimble lock reduces rod rotation for compatible rods. This rod holder is fully adjustable 360 degrees around and over 90 degrees vertically. Like all RAILBLAZA accessories, this the Rod Holder II fits all RAILBLAZA bases. No hardware is needed for accessory installation because the RAILBLAZA port based system is not included. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems. Base not included.

Quantity

Price: $25.99

Shipping: $0.00

Loading Updating cart...

CleatPort

Now your anchor cleat can hold your favorite RAILBLAZA accessory and conserve space in a sport where space is very limited! The RAILBLAZA CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory.  Our new CleatPort not only gives you the option to position a cleat on the boat where you want it but also offers the ability to use that area with any of our accessories. The CleatPort is compatible with all RAILBLAZA accessories.  Many people use this point for mounting their lights, rod holders, or camera mounts. Included is a unique backing plate keeping stainless fastenings isolated from aluminium decks avoiding corrosion.  The CleatPort can be used on your kayak when used as a tender giving a solid tie point, whether it’s tied off the back of the boat while at anchor or to secure it to a mooring or land.  

Product Options
Combination of product variants is not available
Quantity

Price: $16.99

Shipping: $0.00

Loading Updating cart...

StowPod

What do pliers, keys, fishing lures, cellphones, VHFs, binoculars, drink bottles, sunblock and mugs all have in common? The new RAILBLAZA StowPod will hold them all safe and secure while out on the water. In a sport where storgage space is always limited, the StowPod additional storage is perfect. This unique design incorporates a movable partition, which allows the storage pod to transform from a drink holder to a larger open pod for storage of bigger things. Like all other RAILBLAZA accessroies, the StowPod mounts into any vertically or horizontally mounted base with the included RAILBLAZA Adaptor and installation hardware. The StowPod is easily removed and stored when not in use because of the RAILBLAZA slide-locking mechanism.

Product Options
Combination of product variants is not available
Quantity

Price: $29.99

Shipping: $0.00

Loading Updating cart...

DrinkHold

The DrinkHold can be easily mounted into a vertical or horizontal StarPort and will hold anything from drink bottles to coffee mugs along with the ability to hang fishing lures or store pliers.  Like all RAILBLAZA StarPort accessories it is easily removed and transferred to another port or stowed when not in use

Product Options
Combination of product variants is not available
Quantity

Price: $12.99

Shipping: $0.00

Loading Updating cart...

Bait Board & Fillet Table

Keep the mess caused by baiting and filleting off of your boat with the Railblaza Bait Board.  The Railblaza Bait Board is a great addition to any fishing kayak. With a solid combination of a sturdy construction and leight weight efficiency, the bait board is designed for even the most vigorous fishing expedition on the water providing a stable and hard wearing cutting surface. High sides prevent any spillage on to your deck or down the side of the boat.

The kit includes dual mounts for extra stability.  No front lip ensures easy baiting or fileting of the catch.  The molded drain spigot fits a 3/4" (19mm) hose.  

The Railblaza Bait Board can be easily removed for cleaning and storage. As with the rest of the Railblaza accessories, the fillet table slots into the StarPort deck fittings (not included) which provides a secure hold but also allows quick and simple change from one Railblaza item to the next.

Railblaza bases NOT INCLUDED.  The Railblaza Bait Board can be mounted on any deck, gunwale, inflatable tube, or rail using Railblaza StarPorts, SidePorts, RibMounts, or RailMounts.

Quantity

Price: $109.99

Shipping: $0.00

Loading Updating cart...

MobiDevice Holder (Phone/Gps Holder)

The Railblaza Mobile Device Holder, or "Mobi" for short, is ready to secure after your phone, GPS, VHF, EPIRB or other mobile device. The Mobile Device Holder's spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power. For extra peace of mind the adjustable, UV stabilized, urethane rubber retaining strap ensures your device goes nowhere, even in the most rugged environment.

Quantity

Price: $34.99

Shipping: $0.00

Loading Updating cart...

ScreenGrabba Tablet Holder

Many iPad holders are just that, an iPad holder, the RAILBLAZA ScreenGrabba will hold an iPad, and many other tablets.  Some outdoor situations will require your iPad to be in a waterproof case - this is no problem for the ScreenGrabba, simply place the iPad in it's bag, put it in the ScreenGrabba, and clamp it in, easy as that.  The Screen/Tablet Holder's spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power.

Quantity

Price: $56.99

Shipping: $0.00

Loading Updating cart...

Rotating Platform

As the little brother to the RAILBLAZA Three Axis Platform, the RAILBLAZA Rotating Platform is slightly less versatile, but equally effective. As the ideal mount for devices that require less flexibility, like GPS devices and depth finders, the Rotating Platform holds the device in place and also can be turned a full 360 degrees. Made from a combination of high quality UV proof engineering plastics and UV proof HDPE, the platform can be used as a flat surface to make many items Star Port compatible. Once you have finished using the platform it can be removed and the StarPort can be retasked for another application. The Rotating Platform fits in any of the Railblaza bases. No hardware is needed for accessory installation because the RAILBLAZA port based system is not included. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems. Base not included

Quantity

Price: $19.99

Shipping: $0.00

Loading Updating cart...

PlatformBoom 150

With outdoor photography becoming increasingly popular with new innovations in the camera industry, the RAILBLAZA Platform Boom 150 is the a good way to hold the camera and capture the action. Whether the shot is hauling in a record breaking marlin or surfing a huge wave back to shore, capturing the moment from the perfect angle is made easy. As the little brother to the Camera Boom 600, the Platform Boom 150 is over 11 inches long and fully adjustable with 4 moving joints. This makes capturing any angle is possible. The Platform Boom 150 has a screw on the top platform to fit most cameras, including GoPro cameras which are easily attached using the self-adhesive mounts provided with the camera. This camera mount will fit into any RAILBLAZA Star Port. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems. Base not included.

Quantity

Price: $49.99

Shipping: $0.00

Loading Updating cart...

G-Hold 50

The G-Hold 50 is recommended to secure paddles, boga grips and anything of moderate size up to 2 inches around. This G-Hold is 50mm(2 inches). The flexible quick-release strap has two securing points for security of minimum and maximum diameters, providing strong retention. The G-Hold strap has rungs with which to set the tension of each G-Hold firmly. While G-Holds are supplied in singles, it is recommended to use two for long-spanning objects, similar to molded rubber or folding paddle clips. During installation, make sure the G-Holds are parallel when mounted in pairs. When fitting to a StarPort on a vertical surface, make sure the longer arm is positioned at the bottom because this provides extra support before tensioning the strap in place. All G-Holds install in any RAILBLAZA base. No hardware is needed for accessory installation because the RAILBLAZA port based system is not included. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems. Base not included.

Product Options
Combination of product variants is not available
Quantity

Price: $14.99

Shipping: $0.00

Loading Updating cart...

CameraBoom 600

With paddlesport photography becoming increasingly popular with new innovations in the camera industry, the RAILBLAZA Camera Boom 600 is the perfect way to hold the camera and capture the action. Whether the shot is hauling in a record breaking marlin or surfing a huge wave back to shore, capturing the moment from the perfect angle is made easy. Over 700mm (30 inches) long and fully adjustable with 4 moving joints, capturing any angle is possible. The Camera Boom 600 has a screw on the top platform to fit most cameras, including GoPro cameras which are easily attached using the self-adhesive mounts provided with the camera. This camera mount will fit into any RAILBLAZA StarPort. No hardware is needed for accessory installation. **All RAILBLAZA accessories fit the 5 different RAILBLAZA port based systems. Base is not included.

Quantity

Price: $64.99

Shipping: $0.00

Loading Updating cart...

Camera Mount Adapter

The Camera mount adapter will fit all cameras with a ¼ 20 thread insert allowing them to become StarPort compatible.

Then to mount it on almost any surface just add the correct RAILBLAZA mount.

Also includes GoPro Tripod adapter to suit most action cameras on the market.

Quantity

Price: $17.99

Shipping: $0.00

Loading Updating cart...

Camera Mount Kit

This compact option allows you to adjust your camera to every angle, with factory set friction joints your camera will stay steady.

The Camera mount adaptor will fit all cameras with a ¼ 20 thread insert allowing them to become StarPort compatible.

Then to mount it on almost any surface just add the correct RAILBLAZA mount.

Also includes GoPro Tripod adaptor to suit most action cameras on the market.

Quantity

Price: $35.99

Shipping: $0.00

Loading Updating cart...