The RAILBLAZA StarPort is the unique and versatile multifunctional mount, which allows users to fit and re-task the full range of RAILBLAZA accessories. The StarPort can be used as either a deck mount or flush mount base. This base not only comes with a gasket and cap, but also features a slide locking mechanism to confidently lock the RAILBLAZA accessory in place. Made from high grade engineering plastics, the StarPort is easily installed on kayaks, canoes, power boats, sail boats, and ATVs. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from Yak Gear. Water proof silicone recommended, but not included.
Stop compromising rod holder standards by forcing a decision between holding a bait caster, spinning reel, offshore reel, or fly reel. The Rod Holder II will hold any type of rod and reel, with quick adjustments. The rotating collar helps reduce 'strike-theft' and the rear gimble lock reduces rod rotation for compatible rods. This rod holder is fully adjustable 360 degrees around and over 90 degrees vertically. Like all RAILBLAZA accessories, this the Rod Holder II fits all RAILBLAZA bases. No hardware is needed for accessory installation because the RAILBLAZA port based system is not included. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems. Base not included.
RAILBLAZA Rail Mounts are simple to use mounts, allowing the easy attachment of RAILBLAZA accessories to kayak, marine, and recreational sport rails. The Rail Mount 32-41 can be mounted onto any 32-41mm (1.25-1.7'') round or square rail. The 32-41 is the preferred mounting base for the rail system on the Hobie Adventure Island and Hobie Pro Angler. All Rail Mounts come complete with adaptors, rubber grips and self-adhesive grip tape. As always, this complete kit comes with all stainless steel installation hardware and installation instructions.
Now your anchor cleat can hold your favorite RAILBLAZA accessory and conserve space in a sport where space is very limited! The RAILBLAZA CleatPort gives you a tie off point for stern lines and bow lines on small craft. The StarPort gives the extra functionality of adding any RAILBLAZA accessory. Our new CleatPort not only gives you the option to position a cleat on the boat where you want it but also offers the ability to use that area with any of our accessories. The CleatPort is compatible with all RAILBLAZA accessories. Many people use this point for mounting their lights, rod holders, or camera mounts. Included is a unique backing plate keeping stainless fastenings isolated from aluminium decks avoiding corrosion. The CleatPort can be used on your kayak when used as a tender giving a solid tie point, whether it’s tied off the back of the boat while at anchor or to secure it to a mooring or land.
The Railblaza Mobile Device Holder, or "Mobi" for short, is ready to secure after your phone, GPS, VHF, EPIRB or other mobile device. The Mobile Device Holder's spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power. For extra peace of mind the adjustable, UV stabilized, urethane rubber retaining strap ensures your device goes nowhere, even in the most rugged environment.
The Railblaza NaviLux 360 Degree LED Light is an externally mounted, 1 Cree LED white light that is perfect for kayak, canoes, and SUP’s looking to comply with US Coast Guard regulations and ensure their visibility while paddling between dusk and dawn. The Railblaza NaviLux 360 Degree LED Light will fit into any Railblaza Base or even the Railblaza TelePole for extra height and thus more visibility. The light is powered by 3 AA batteries, is waterproof in up to 16 feet of water and features a 20 hour battery life while emitting 110 lumens of light. Also included with the NaviLux 360 Degree Light is an easily installed/removed “Directional Shield” to transform the 360 degree light into a focused light displaying only concentrated beams of light in one direction.
The Camera mount adapter will fit all cameras with a ¼ 20 thread insert allowing them to become StarPort compatible.
Then to mount it on almost any surface just add the correct RAILBLAZA mount.
Also includes GoPro Tripod adapter to suit most action cameras on the market.
This compact option allows you to adjust your camera to every angle, with factory set friction joints your camera will stay steady.
The Camera mount adaptor will fit all cameras with a ¼ 20 thread insert allowing them to become StarPort compatible.
Then to mount it on almost any surface just add the correct RAILBLAZA mount.
Also includes GoPro Tripod adaptor to suit most action cameras on the market.
The DrinkHold can be easily mounted into a vertical or horizontal StarPort and will hold anything from drink bottles to coffee mugs along with the ability to hang fishing lures or store pliers. Like all RAILBLAZA StarPort accessories it is easily removed and transferred to another port or stowed when not in use
The G-Hold 50 is recommended to secure paddles, boga grips and anything of moderate size up to 2 inches around. This G-Hold is 50mm(2 inches). The flexible quick-release strap has two securing points for security of minimum and maximum diameters, providing strong retention. The G-Hold strap has rungs with which to set the tension of each G-Hold firmly. While G-Holds are supplied in singles, it is recommended to use two for long-spanning objects, similar to molded rubber or folding paddle clips. During installation, make sure the G-Holds are parallel when mounted in pairs. When fitting to a StarPort on a vertical surface, make sure the longer arm is positioned at the bottom because this provides extra support before tensioning the strap in place. All G-Holds install in any RAILBLAZA base. No hardware is needed for accessory installation because the RAILBLAZA port based system is not included. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems. Base not included.
The Spike Adapter threads directly into the top of the Micro Anchor Spike allowing you to mount a light, camera mount, or any other RAILBLAZA accessory.
As the little brother to the RAILBLAZA Three Axis Platform, the RAILBLAZA Rotating Platform is slightly less versatile, but equally effective. As the ideal mount for devices that require less flexibility, like GPS devices and depth finders, the Rotating Platform holds the device in place and also can be turned a full 360 degrees. Made from a combination of high quality UV proof engineering plastics and UV proof HDPE, the platform can be used as a flat surface to make many items Star Port compatible. Once you have finished using the platform it can be removed and the StarPort can be retasked for another application. The Rotating Platform fits in any of the Railblaza bases. No hardware is needed for accessory installation because the RAILBLAZA port based system is not included. **All RAILBLAZA accessories fit the different RAILBLAZA port based systems. Base not included
Many iPad holders are just that, an iPad holder, the RAILBLAZA ScreenGrabba will hold an iPad, and many other tablets. Some outdoor situations will require your iPad to be in a waterproof case - this is no problem for the ScreenGrabba, simply place the iPad in it's bag, put it in the ScreenGrabba, and clamp it in, easy as that. The Screen/Tablet Holder's spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power.
What do pliers, keys, fishing lures, cellphones, VHFs, binoculars, drink bottles, sunblock and mugs all have in common? The new RAILBLAZA StowPod will hold them all safe and secure while out on the water. In a sport where storgage space is always limited, the StowPod additional storage is perfect. This unique design incorporates a movable partition, which allows the storage pod to transform from a drink holder to a larger open pod for storage of bigger things. Like all other RAILBLAZA accessroies, the StowPod mounts into any vertically or horizontally mounted base with the included RAILBLAZA Adaptor and installation hardware. The StowPod is easily removed and stored when not in use because of the RAILBLAZA slide-locking mechanism.